Search Results

August 4th, 2013

BAJA BUMPERS IS CLOSED

Well here it is in a nutshell, we are closing Baja Bumpers not because business has been bad but because God has called us to the missions field in Baja, Mexico to work at Rancho Sordo Mudo, a deaf school for children.  It has been a great ride, our customers have been wonderful to work […]

November 28th, 2011

Toyota FJ Cruiser Wench Bumper

FJ Wench bumper is designed for the 4WD enthusiast and you rock crawler nuts, comes in 1 5/8 DOM tubing for the extra strength, is designed to fit the low profile standard bolt pattern 8,000 or 9,000 lb wench.  Gives you superior radiator protection and open access to the factory rope hooks. Has improved approach […]

August 14th, 2009

Rear Bumper for Ford Ranger 1993-1998

The Baja Bumpers Ford Ranger rear tube bumper will fit all 1993-1998 Rangers. It is available with or without a receiver hitch; this hitch is not rated for towing. As with all our products, this bumper is a fully functional off-road bumper meant to withstand the rigors of the true off-roader, and can be installed […]

August 14th, 2009

Front Bumper for Ford Ranger 1993-1997

The Baja Bumpers Ford Ranger front tube bumper will fit all 1993-1997 Rangers. As with all our products, this bumper is a fully functional off-road bumper meant to withstand the rigors of the true off-roader, and can be installed in under an hour with only hand tools (no cutting or welding required). The Ford Ranger […]

August 14th, 2009

Front Winch Bumper for Tacoma/4Runner 1995-2004

The Baja Bumpers Tacoma/4Runner front winch tube bumper will fit all 1995-2004 2×4, 4×4, or PreRunner Tacoma’s, as well as 4Runners. This bumper is not just for looks, it is a fully functional off-road bumper meant to withstand the rigors of the true off-roader, and can be installed in under an hour with only hand […]

March 3rd, 2009

Instructions for Installation of Rear Bumper Assembly

  Remove existing bumper and save bolts. Remove all bolts and hardware from your new bumper and save bolts. Install new bumper using factory bolts to the frame, then add the provided grade 8 bolts through the existing holes in the bottom of the frame. Once all six bolts are in and adjusted, tighten all […]

March 3rd, 2009

Instructions for Installation of Front Bumper Assembly

  Disconnect wiring from front turn signals in bumper. Disconnect bumper from front body tabs on left & right fenders. Disconnect front bumper brackets from left & right frame. Remove 4 inch frame extensions from the front of the frame rails. SAVE BOLTS. Remove bolts from body mounts, located on core support. Making sure that […]

December 28th, 2007

Baja Bumpers

BAJA BUMPERS IS NOW CLOSED Well here it is in a nutshell, we are closed, not because business has been bad but because God has called us to the mission field in Baja, Mexico to work at Rancho Sordo Mudo, a deaf school for children.  It has been a great ride, our customers have been […]

June 13th, 2007

Rear Bumper for Tacoma 1995 – 2004

The Baja Bumpers Tacoma rear tube bumper will fit all 1995-2004 2×4, 4×4, or PreRunner Tacomas. It is available with or without a receiver hitch, and also has an available removable spare tire carrier. As with all our products, this bumper is a fully functional off-road bumper meant to withstand the rigors of the true […]

June 13th, 2007

Front Bumper for Tacoma/4Runner 1995 – 2004

The Baja Bumpers Tacoma/4Runner front tube bumper will fit all 1995-2004 2×4, 4×4, or PreRunner Tacomas, as well as 4Runners. This bumper is not just for looks, it is a fully functional off-road bumper meant to withstand the rigors of the true off-roader, and can be installed in under an hour with only hand tools […]