BajaBumpers

This kit comes with all the pieces you will need to convert the front corner lights to turn signal marker lights. Once you remove your stock front bumper you will no longer have front turn signals.

Follow our simple how-to instructions and you will be done in less than 30 minutes. You will need a die grinder or something to enlarge the hole in the plastic light.

Check it out in our “How-to” section.

The Baja Bumpers Tacoma rear tube bumper will fit all 1995-2004 2×4, 4×4, or PreRunner Tacomas. It is available with or without a receiver hitch, and also has an available removable spare tire carrier. As with all our products, this bumper is a fully functional off-road bumper meant to withstand the rigors of the true off-roader, and can be installed in under an hour with only hand tools (no cutting or welding required).

The rear bumper is designed to protect the body from the rear, as well as add functionality. This bumper is made from all new materials, MIG welded, and includes a license plate light/mount. All the round tubing is 1 5/8″ x .120 wall, and the rectangular tubing is 1″ x 2″ x.120 wall, all mild steel (HREW). It is designed to give you that tough custom look, with a 30 minute*, bolt on, no drilling installation.

This bumper is for off-road use, is not DOT approved, and like all off-road equipment, you use it at your own risk.

*Time estimate not including wiring for lights

The Baja Bumpers Tacoma/4Runner front tube bumper will fit all 1995-2004 2×4, 4×4, or PreRunner Tacomas, as well as 4Runners. This bumper is not just for looks, it is a fully functional off-road bumper meant to withstand the rigors of the true off-roader, and can be installed in under an hour with only hand tools (no cutting or welding required).

The front bumper is designed for frontal protection from rocks, brush, and debris, and extends 4″ below the frame to protect the radiator as well. It is available with either two light tabs and the light guard bar or three light tabs and no bar (this will accommodate the 8″ or 9″ lights, without blocking the stock headlights). All the tubing is 1 5/8″ x .120 wall mild steel (HREW). The front skid plate is 1/8″ aluminum plate and is included with the front bumper. The bumper mounts to the bottom of the frame with four bolts, and to the core support with two bolts, using all your original hardware. These baja bumpers are designed to give you that “Don’t mess with me” look you want, with the 30 minute*, bolt on, no drilling installation you need.

You will need to add front turn signals, check out our turn signal conversion kit, as they are mounted in the stock bumper. This bumper is for off-road use, is not DOT approved, and like all off-road equipment, you use it at your own risk.

*Time estimate not including wiring for lights

We just added a rear bumper for the Toyota Tacoma Prerunner (95 1/2 – 04), another in our line of tube bumpers. This version is for people that want to have a functional tailgate. It is made out of 120 wall 1 5/8″ round tubing, and 120 wall 1″ x 2″ rectangular tubing. It includes a hitch, and will have diamond plate on the top (not in the photos yet). We added a gallery for it. If you have a 97-00 Toyota Tacoma Prerunner, contact us about a package deal with both front and rear bumper. We are currently working on a version of the rear bumper for people who do not wish to have a tailgate, as well as a version for no tailgate that includes a spare tire carrier, so check back soon as our line of off-road accessories continually expands.

Are you tired of asphalt roads and plastic bumpers? Need something better? Look no further! Baja Bumpers is what you need. We fabricate tube bumpers, and other off-road accessories for trucks and SUVs. We make mostly bolt-on solutions, but also do custom fabrication. As our site is developed, you can check out our products on ebay.

If you want to contact us, you can E-Mail bajabumpers@bajabumpers.com or call us at 623-866-3089.