Front Winch Bumper for Tacoma/4Runner 1995-2004
The Baja Bumpers Tacoma/4Runner front winch tube bumper will fit all 1995-2004 2×4, 4×4, or PreRunner Tacoma’s, as well as 4Runners. This bumper is not just for looks, it is a fully functional off-road bumper meant to withstand the rigors of the true off-roader, and can be installed in under an hour with only hand tools, drilling of a ½” hole is required (no cutting or welding required).
This winch bumper is designed to use the low profile 8,000 to 10,000 winch (winch not included but available upon request) and has mounting features for a Fairlead and comes with 2 clevis attaching mounts (clevis not included). The winch bumper is designed with wrap around ends for fender protection. Some models of Tacoma’s will require a frame extension (extension is included).
The front bumper is designed for frontal protection from rocks, brush, and debris, and extends 4″ below the frame to protect the radiator as well. It is available with either two light tabs and the light guard bar or three light tabs and no bar (this will accommodate up to 10″ lights, without blocking the stock headlights). All the tubing is 1 5/8″ x .120 wall mild steel (HREW). The front skid plate is 1/8″ aluminum plate and is included with the front bumper. The bumper mounts to the bottom of the frame with four bolts, and with two bolts (included) through top of frame, and your original hardware. These Baja Bumpers are designed to give you that “Don’t mess with me” look you want and bolt on installation you need.
You will need to add front turn signals, as they are mounted in the stock bumper. This bumper is for off-road use, is not DOT approved, and like all off-road equipment, USE AT YOUR OWN RISK.